esteem

The Esteem Series of aluminum doors brings a modern look to any home. These doors can be custom painted, filled with coloured glass or panels and are available in a wide variety of sizes. Increase your curb appeal with window designs that suit your home, while benefitting from the durability of a sturdy aluminum door.

STANDARD VISION LITES OPTIONS CONSULT BARCOL FOR ADDITIONAL CUSTOM GLASS OPTIONS

GLASS

Available in tempered single pane and tempered sealed units. Glass options include Clear, Satin Privacy (Frosted), Dark Tint Clear, Dark Tint Privacy and Bronze Reflective. ThermoPane.

CLEAR

DARK TINT CLEAR

SATIN PRIVACY

DARK TINT PRIVACY

BRONZE REFLECTIVE

THERMOCLEAR POLYCARBONATE

Available in Triple Wall 16mm. Colour options include Clear, Bronze, Blue, White Opal, and Charcoal.

CLEAR LEXAN

BRONZE LEXAN

BLUE LEXAN

CHARCOAL LEXAN

WHITE OPAL LEXAN

Note: Colour representation may not be accurate. Exact colour matches can be requested from Barcol.

ESTEEM SERIES STYLE OPTIONS

4 SECTION - 2 PANEL	4 SECTION - 3 PANEL	4 SECTION - 4 PANEL	4 SECTION - 5 PANEL
8' X 7'	10' X 7'	14' X 7'	18' X 7'
8' X 8'	10' X 8'	14' X 8'	18' X 8'
9' X 7'	12' X 7'	16' X 7'
9' X 8'	12' X 8'	16' X 8'

Headroom requirements may vary on doors over 10′ high.

ESTEEM SERIES COLOUR OPTIONS

ANODIZED FINISH

CLEAR

DURANAR FINISH

BLACK

WHITE

WOODGRAIN FINISH

CEDAR WOODGRAIN

WALNUT WOODGRAIN

Highlight the classic feel of your home while benefitting from the durability of an aluminum garage door. These doors have a low-maintenance finish that requires no staining or painting and, unlike real wood, they will not warp, shrink, peel, or crack.

POWDERCOAT OPTIONS

CHARCOAL

DARK BROWN

SABLE GREY

DARK BRONZE

Note: A full selection of custom paint colors are available. Please consult factory for details. Colour representation may not be accurate. Exact colour matches can be requested from a Steel-Craft dealer. Custom colour options available upon request.

STANDARD LAYOUTS

The Esteem Series of aluminum doors brings a modern look to any home. These doors can be custom painted, filled with coloured glass and are available in a wide variety of sizes. Increase your curb appeal with window designs that suit your home, while benefitting from the durability of a sturdy aluminum door.

FOUR SECTION – 2 PANEL

8′ x 7′

8′ x 8′

9′ x 7′

9′ x 8′

FOUR SECTION – 3 PANEL

10′ x 7′

10′ x 8′

12′ x 7′

12′ x 8′

FOUR SECTION – 4 PANEL

14′ x 7′

14′ x 8′

16′ x 7′

16′ x 8′

FOUR SECTION – 5 PANEL

18′ x 7′

18′ x 8′

WEATHERSTRIPPING

Bottom weatherstripping: U-type arctic grade vinyl
Section interface: arctic grade vinyl bubble-shaped weatherstrip at all section meeting rails
Jamb: anodized or painted aluminum with two-point flexible arctic grade vinyl weatherstrip
Header: anodized or painted aluminum with two-point flexible arctic grade vinyl weatherstrip

DOOR FACE HARDWARE

Graduated end hinges and centre hinges made from galvanized steel
Heavy duty rollers with 10 grade heat-treated and outer races with 10 floating ball bearings

COUNTERBALANCE SYSTEM

Class II oil tempered ASTM A229 wire, minimum 10,000 cycle torsion springs on continuous steel shaft
Aircraft quality galvanized lift cables with a minimum safety factor of 7 to 1

FRAMES

Thickness: 1.8 mm/0.071″; 3 mm/0.118″ at fastener locations
Standard Top/Bottom/End Stiles: 162 mm/6.375
Intermediate Stiles: 76 mm/3.0

INSULATED ALUMINUM PANEL

1.27 mm thick aluminum sheetmaterial insulated and sealed to door frame

FINISH

Anodizing applied to #17 clear anodized Architectural Class II and is in accordance with AA-M12CC22A31 (Aluminum Association) specifications. Painted product (special order) powdercoated to AAMA 2603 standards

TEMPERED GLASS, POLYCARBONATE OR INSULATED ALUMINUM PANEL

All glazing materials sealed to door frame with butyl tape and held securely with rigid PVC snap-in mouldings

STRUTTING

Doors over 11′-0″ in width shall be reinforced with 16Ga galvanized steel “Z” brace per section
Anodizing applied to #17 clear anodized Architectural Class II and is in accordance with AA-M12CC22A31 (Aluminum Association) specifications
Strutting required for doors wider than 3,353 mm

TRACKS

50 mm or 75 mm wide galvanized steel tracks